Fog Light Assembly Removal

[StevoSRT]

Does anyone know how to remove the actual fog light assembly housing?

I have moisture in there that shattered a bulb so I need to get it off to clean it out.

Thanks :D

[Tbird100636]

Does anyone know how to remove the actual fog light assembly housing?

I have moisture in there that shattered a bulb so I need to get it off to clean it out.

Thanks :D

LAMP


https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/813e283b.gif


Disconnect and isolate the battery negative cable.
Reach under and behind the front bumper to access and disconnect the headlamp and dash wire harness connector (3) from the front fog lamp bulb connector receptacle.
Remove the three screws (1) that secure the front fog lamp housing (2) to the front bumper support.
Remove the front fog lamp from behind the front bumper.

[formerice]

Thank's Tbird. I wish someone would figure how to retrofit them to the LX cars. The Hella fogs are nice and the cheap pos fogs that are used in the LX cars suck.