PDA

View Full Version : 4.7l single plane aluminum intake... Pics inside!!!

AIR_RAM
11-29-2008, 07:48 PM
Well guys I have been hard at work designing adapter plates to bolt up a Cobra "LOWER" (<===HINT) Intake manifold to our 4.7L engine... We completed the adapters and it turns out they will allow for OTHER intakes to mount to the 4.7L engine... to include the SULLIVAN PERFORMANCE SINGLE PLANE INTAKE MANIFOLD. We have it mounted with just a few new obstacles and it should be up and running shortly... Here are a few pictures.

We will have some details as soon as we get some testing done. But its looking promising.

Just some teaser pics...

http://www.airram.com/productphotos/large/2905.jpg
http://www.airram.com/productphotos/large/2880.jpg
http://www.airram.com/productphotos/large/2903.jpg
http://www.airram.com/productphotos/large/2904.jpg

To gain another 3" of clearance we are going to test fit this lower profile elbow...

http://www.airram.com/productphotos/large/2900.jpg

This should help out quite a bit in gaining additional hood clearance... I'm not worried about the RAM... its the Dakota boyz that would be the ones to benefit from them. (http://www.airram.com/product.php?categoryid=0&productid=1296&searchquery=adapters)



Here are some pictures of the install today...

http://www.fototime.com/5754443E5F12553/standard.jpg
http://www.fototime.com/79CCDD6D002584D/standard.jpg
http://www.fototime.com/7930E44923B8C8A/standard.jpg
http://www.fototime.com/C2BA604FDB5FD15/standard.jpg
http://www.fototime.com/96AFDE2499D9144/standard.jpg
http://www.fototime.com/75AD072F3928775/standard.jpg (http://www.airram.com/product.php?categoryid=0&productid=1296&searchquery=adapters)

What do you think?

SPEED SAFE, AIR RAM
AIR_RAM
12-09-2008, 06:49 AM
19 people looked at this and several days has passed and nobody has anything to say... LOL... :)

Come on guys... I have been busting my tail end off on this project! LOL... :D

What do you think?

SPEED SAFE, AIR RAM
black345hemi
01-12-2009, 09:24 AM
looks awsome man
Mr.AzianRam
02-27-2009, 06:01 PM
Looks good. I'd buy if I had the money right now.
ndgo88
04-20-2009, 11:02 AM
Ssssswwwwwwwwwwwweeeeeeeettttttttt!!!!!!!!!!!!!!!! !!!!!!
AIR_RAM
04-22-2009, 12:57 AM
Ssssswwwwwwwwwwwweeeeeeeettttttttt!!!!!!!!!!!!!!!! !!!!!!

Had it up and running the night of my deployment... Did not get a chance to do any testing... but "Its Alive!"

http://www.airram.com/productphotos/large/2955.jpg (http://www.airram.com/custompage.php?page=18)

SPEED SAFE, AIR RAM
ddgoose69
06-02-2009, 07:33 AM
that is sick escpeially if we can run a kenne bell on our engines. will be looking to do this after the first of the year. any prices yet?
jaws09
06-02-2009, 02:35 PM
looks clean...what kind of gains do you hope for from this intake?