PDA

View Full Version : 03 1500 tail lamp failure

ace75
09-26-2011, 03:37 AM
The tail lights stopped working, I have signals and brake lamps on truck and trailer when hooked up. No tail running lamps. I checked fuses and all good. Any ideas?
Tbird100636
09-26-2011, 06:38 AM
Check back later tonight and I'll look into it.
Tbird100636
09-26-2011, 05:30 PM
Are you sure it's just the rear parking lights that aren't working??? Double check the front park lights, the cab clearance lights (if equipped) and the licence plate lights. The fuses you need to check are Fuse 15 50A (Feeds Park Lamp Relay), Fuse 32 10A (Feeds right side park lights), Fuse 33 20A (trailer connectors), and Fuse 34 10A (Feeds left side park lights). All of the park lights except the RF share the same ground. G103 or G104, either one located in the LF corner of the engine compartment, to the left of the IPM (Fuse block).
https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/81053abe.gif

If you need a wiring diagram let me know.